M802 Digital Marine SSB Radio c14862

Model: M802 Brand: Icom

The latest ICOM Digital Signal Processor technology with a compact remote head Standard 4x8 remote controller The IC-M802 offers an industry-standard 4-inch tall (10.16 cm) remote controller. When set up with the IC-M502 VHF radio, Icom offers you a complete communications station. Large LCD with dot matrix characters You can easily read the alphanumeric name of any of the 1355 ITU channels at a glance with the large LCD display. Nighttime operation is no problem with 10 levels (plus OFF) adjustable backlit display and keypad. Easy to use in all conditions The IC-M802 offers two large dials bank and channel for easy channel selection. Up to 16 banks of 20 (max.) each for user channels, and 17 banks for ITU channels are available. Built-in digital selective calling For added safety at sea, the IC-M802 offers the latest in one-touch DSC emergency communications technology. (ITU Class E standard.) The emergency button is covered by a red, spring loaded hatch to avoid accidental DSC activation. Digital signal processor advantage The speech compressor, utilizing DSP, increases average talk power. Flexible filter settings provide for narrow band signals like e-mail, SITOR, FSK and other operation without an optional filter. 150W (PEP) of powerful output 150 Watts of power offers superior worldwide communications. A one piece, die cast aluminum chassis and a large cooling fan allow continuous transmission at full output power? very important for data communications, like e-mail. One-touch e-mail access An SSB first! The IC-M802 can be set to memorize your HF e-mail access frequency, mode and bandwidth settings. At sea e-mail has never been easier. * Please consult with an HF e-mail provider for details. Automatic antenna tuner, AT-140 An optional automatic antenna tuner, AT-140, easily connects to the IC-M802. When the tuner cannot tune the antenna, the IC-M802 bypasses the tuner and displays a warning indicator on the LCD. Other features Wide band receive coverage (0.5 29.9999MHz) Remote control mic allows you to select channels directly Accessory RS-232C port allows connection of modem, etc. GPS input, NMEA 0183 version 3.01 A headphone jack in front of the controller Specifications General Frequency coverage Rx Tx (unit: MHz) 0.5? 29.9999 (continuous) 1.6? - B Unwanted sideband 55d - B Carrier suppression 40d - B Microphone impedance 2.4k - Ω Receiver Sensitivity (at 10d - B DSC (Except 1st IF image) More than 50d - B DSC (1st IF image) More than 60d - B Audio output power 4.0W at 10% distortion with a 4Ω load Audio output impedance: 4? 8Ω Clarity variable range 150Hz GPS interface NMEA 0183 version 3.01 All stated specifications are subject to change without notice or obligation. Cable connections are easy to install. AT-130 is also available. MN-100 ANTENNA MATCHER Match the transceiver to a dipole antenna. Covers all HF bands from 1.5 to 30MHz. Two 8m (26.2ft) antenna wires come attached. MN-100L ANTENNA MATCHER Match the transceiver to a longwire antenna. Covers all HF bands from 1.5 to 30MHz. A 15m (49.2ft) antenna wire comes attached. OPC-1147/N SHIELDED CONTROL CABLE 10m (32.8ft) shielded control cable connects between AT-140 and transceiver. OPC-1147N is for use with AT-140 Version 36. HM-135 HAND MICROPHONE Water resistant, remote function mic. Same as supplied. MB-75 FLUSH MOUNT KIT For mounting the controller or speaker to a panel. SP-24 EXTERNAL SPEAKER 4x4-inch external speaker. Same as supplied. Input impedance: 4Ω. Max. input power: 7W. AH-710 FOLDED DIPOLE ANTENNA Covers 1.9 to 30MHz band. Has an SO-239 connector and 30m (98.4ft) coaxial cable. Easy to assemble (non-kink construction) . RC-25 REMOTE CONTROLLER Remote controller head. Same as supplied. OPC-1106 SEPARATION CABLE 5m (16.4ft) separation cable between controller and main unit. Same as supplied. Some options may not be available in some countries. Please ask your dealer for details. product brochure - . PDF instruction manual - . « less