Canmar Yacht Sales

e-Series Video Accessory Cable

E-Series Video In Cable, Composite x4 (1.5m)

E-Series Video Out Cable (20m)

G170-17" Ultra Bright Marine Display

Fluxgate Compass Sensor

Front Flush Mount Kit for Ray218 A46060

Raymarine front flush mount kit for Ray218.

Evolution Autopilot

Evolution AutopilotEvolution EV-1 with p70 No calibration required! 3Cbr />The EV Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. EV Sensor Core Benefits Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change. Flexible installation options. Mount above or below deck. Simple SeaTalkng connectivity to the control head and ACU. Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions. Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes. Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays. žvolution Top View ACU-Front 3Cbr />Autopilot Control Unit (ACU)The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type: 3Cbr />Supported Drives ACU-100 3Cbr />Wheel, tiller and 0.5 ltr HydraulicACU-200 3Cbr />Type 1 Raymarine hydraulic, linear and rotary mechanical drives ACU-300 3Cbr />For solenoid controlled steering systems and Raymarine constant running hydraulic pumps ACU-400 3Cbr />Type 2 and 3 Raymarine hydraulic, linear, and rotary mechanical drives View more about Raymarine Drive Units Your Evolution Autopilot SystemEV-1 Systems with Raymarine Drives The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks. 3Cbr /> EV-2 for Steer-By-Wire Propulsion Designed for the latest drive-by-wire steering system, the EV-2 connects directly to Raymarine 19s SeaTalkng bus and also features a dedicated CAN Bus port for direct connection to steer-by-wire steering systems like ZF Pod Drives, Volvo IPS* and Teleflex Optimus systems. The single CAN Bus connection to the EV-2 eliminates the need for an ACU, further simplifying installation.Engineered for simplicity, Evolution autopilots eliminate the need for complicated set up and calibration. Once Evolution is installed, getting started is as easy as switching the autopilot on.Thanks to the intelligent EV sensor core, the autopilot automatically evolves and adapts to your vessel 19s steering characteristics without any user adjustments.Evolution AI!22The culmination of Raymarine 19s 30 years of autopilot expertise, FLIR Systems research and development, and advanced aerospace guidance technology, Evolution AI!22 control algorithms deliver a new level of accurate autopilot control.This innovative breakthrough in autopilot intelligence enables Evolution autopilots to perceive their environment and then instantly calculate and evolve steering commands to maximize performance. The result is precise and confident course keeping, regardless of vessel speed or sea conditions. The EV Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. EV Sensor Core Benefits Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change. Flexible installation options. Mount above or below deck. Simple SeaTalkng connectivity to the control head and ACU. Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions. Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes. Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays. žvolution Top View ACU-Front 3Cbr />Autopilot Control Unit (ACU)The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type: 3Cbr />Supported Drives ACU-100 3Cbr />Wheel, tiller and 0.5 ltr HydraulicACU-200 3Cbr />Type 1 Raymarine hydraulic, linear and rotary mechanical drives ACU-300 3Cbr />For solenoid controlled steering systems and Raymarine constant running hydraulic pumps ACU-400 3Cbr />Type 2 and 3 Raymarine hydraulic, linear, and rotary mechanical drives View more about Raymarine Drive Units Your Evolution Autopilot SystemEV-1 Systems with Raymarine Drives The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks. 3Cbr /> EV-2 for Steer-By-Wire Propulsion Designed for the latest drive-by-wire steering system, the EV-2 connects directly to Raymarine 19s SeaTalkng bus and also features a dedicated CAN Bus port for direct connection to steer-by-wire steering systems like ZF Pod Drives, Volvo IPS* and Teleflex Optimus systems. The single CAN Bus connection to the EV-2 eliminates the need for an ACU, further simplifying installation. The EV Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. EV Sensor Core Benefits Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change. Flexible installation options. Mount above or below deck. Simple SeaTalkng connectivity to the control head and ACU. Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions. Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes. Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays. žvolution Top View ACU-Front 3Cbr />Autopilot Control Unit (ACU)The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type: 3Cbr />Supported Drives ACU-100 3Cbr />Wheel, tiller and 0.5 ltr HydraulicACU-200 3Cbr />Type 1 Raymarine hydraulic, linear and rotary mechanical drives ACU-300 3Cbr />For solenoid controlled steering systems and Raymarine constant running hydraulic pumps ACU-400 3Cbr />Type 2 and 3 Raymarine hydraulic, linear, and rotary mechanical drives View more about Raymarine Drive Units Your Evolution Autopilot SystemEV-1 Systems with Raymarine Drives The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks. 3Cbr /> EV-2 for Steer-By-Wire Propulsion Designed for the latest drive-by-wire steering system, the EV-2 connects directly to Raymarine 19s SeaTalkng bus and also features a dedicated CAN Bus port for direct connection to steer-by-wire steering systems like ZF Pod Drives, Volvo IPS* and Teleflex Optimus systems. The single CAN Bus connection to the EV-2 eliminates the need for an ACU, further simplifying installation.

G120 Inverted Marine Display

Raymarine G120 Inverted Marine Display is the best choice for open cockpits, bright pilothouses and the most demanding tropical lighting conditions. Packed with features the Raymarine G120 provides a commanding view of your on-board navigation system, PC or entertainment system.

G170 Inverted Marine Display

Raymarine G170 Inverted Marine Display is the best choice for open cockpits, bright pilothouses and the most demanding tropical lighting conditions. Packed with features the Raymarine G170 provides a commanding view of your on-board navigation system, PC or entertainment system.

Full Function Remote Keyboard

Raymarine Full Function Remote Keyboard E-Series Full Function Remote Keyboard with SeaTalk 2 Connection. Control your E-Series system remotely with the Full Function SeaTalk2 Remote Keyboard.

Flush Mount Kit for Ray55 Front

Raymarine Flush Mount Kit for Ray55 front flush mount.

Flush Mount Kit Rear

Raymarine Flush Mount Kit for Ray49,55 and 218 rear flush mount.

Flush Mount Kit for Ray48-54 VHF

RayMarine flush mount kit for Ray48 and Ray54 VHF radios.

Fishfinder Adjustable In-Hull Depth Transducer

FITS 265/365/470/750 Fishfinders.

E-Series Video Out Cable

Raymarine E-Series Video Out Cable VGA Video Output cable for connecting E-Series to PC monitors, Plasma Television displays etc. Video cable with waterproof 15 pin VGA connectors. Select either 10M E55055 or 20M E55056 below.

E-Series Video In Cable Composite

Raymarine E-Series Video In cable composite video input cable. For attaching cameras, entertainment components, DVD players etc. to E-Series displays.

E-Series Video In Cable S-Video

Raymarine 2-Channel S-Video Input Cable for connecting cameras, entertainment components, satellite television receivers, etc. to E-Series displays.

Flush Mount f/7 Inch CRT Displays

Flush mount for 7" CRT displays.

Flush Mount for DS600-RC435

Flush mount kit for DS600x and RC435 displays.

Flush Mount Kit f/VHF 210 Front Mount

For 210 VHF (Front Mount).