Breakwater Marine Electronics

e-Series Video Accessory Cable

E-Series Video In Cable, Composite x4 (1.5m)

E-Series Video Out Cable (20m)

Evolution Autopilot

Evolution AutopilotEvolution EV-1 with p70 No calibration required! 3Cbr />The EV Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. EV Sensor Core Benefits Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change. Flexible installation options. Mount above or below deck. Simple SeaTalkng connectivity to the control head and ACU. Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions. Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes. Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays. žvolution Top View ACU-Front 3Cbr />Autopilot Control Unit (ACU)The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type: 3Cbr />Supported Drives ACU-100 3Cbr />Wheel, tiller and 0.5 ltr HydraulicACU-200 3Cbr />Type 1 Raymarine hydraulic, linear and rotary mechanical drives ACU-300 3Cbr />For solenoid controlled steering systems and Raymarine constant running hydraulic pumps ACU-400 3Cbr />Type 2 and 3 Raymarine hydraulic, linear, and rotary mechanical drives View more about Raymarine Drive Units Your Evolution Autopilot SystemEV-1 Systems with Raymarine Drives The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks. 3Cbr /> EV-2 for Steer-By-Wire Propulsion Designed for the latest drive-by-wire steering system, the EV-2 connects directly to Raymarine 19s SeaTalkng bus and also features a dedicated CAN Bus port for direct connection to steer-by-wire steering systems like ZF Pod Drives, Volvo IPS* and Teleflex Optimus systems. The single CAN Bus connection to the EV-2 eliminates the need for an ACU, further simplifying installation.Engineered for simplicity, Evolution autopilots eliminate the need for complicated set up and calibration. Once Evolution is installed, getting started is as easy as switching the autopilot on.Thanks to the intelligent EV sensor core, the autopilot automatically evolves and adapts to your vessel 19s steering characteristics without any user adjustments.Evolution AI!22The culmination of Raymarine 19s 30 years of autopilot expertise, FLIR Systems research and development, and advanced aerospace guidance technology, Evolution AI!22 control algorithms deliver a new level of accurate autopilot control.This innovative breakthrough in autopilot intelligence enables Evolution autopilots to perceive their environment and then instantly calculate and evolve steering commands to maximize performance. The result is precise and confident course keeping, regardless of vessel speed or sea conditions. The EV Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. EV Sensor Core Benefits Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change. Flexible installation options. Mount above or below deck. Simple SeaTalkng connectivity to the control head and ACU. Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions. Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes. Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays. žvolution Top View ACU-Front 3Cbr />Autopilot Control Unit (ACU)The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type: 3Cbr />Supported Drives ACU-100 3Cbr />Wheel, tiller and 0.5 ltr HydraulicACU-200 3Cbr />Type 1 Raymarine hydraulic, linear and rotary mechanical drives ACU-300 3Cbr />For solenoid controlled steering systems and Raymarine constant running hydraulic pumps ACU-400 3Cbr />Type 2 and 3 Raymarine hydraulic, linear, and rotary mechanical drives View more about Raymarine Drive Units Your Evolution Autopilot SystemEV-1 Systems with Raymarine Drives The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks. 3Cbr /> EV-2 for Steer-By-Wire Propulsion Designed for the latest drive-by-wire steering system, the EV-2 connects directly to Raymarine 19s SeaTalkng bus and also features a dedicated CAN Bus port for direct connection to steer-by-wire steering systems like ZF Pod Drives, Volvo IPS* and Teleflex Optimus systems. The single CAN Bus connection to the EV-2 eliminates the need for an ACU, further simplifying installation. The EV Sensor CoreAt the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing.Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards. EV Sensor Core Benefits Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change. Flexible installation options. Mount above or below deck. Simple SeaTalkng connectivity to the control head and ACU. Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions. Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes. Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays. žvolution Top View ACU-Front 3Cbr />Autopilot Control Unit (ACU)The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalkng bus. Choose the ACU that fits your steering system type: 3Cbr />Supported Drives ACU-100 3Cbr />Wheel, tiller and 0.5 ltr HydraulicACU-200 3Cbr />Type 1 Raymarine hydraulic, linear and rotary mechanical drives ACU-300 3Cbr />For solenoid controlled steering systems and Raymarine constant running hydraulic pumps ACU-400 3Cbr />Type 2 and 3 Raymarine hydraulic, linear, and rotary mechanical drives View more about Raymarine Drive Units Your Evolution Autopilot SystemEV-1 Systems with Raymarine Drives The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks. 3Cbr /> EV-2 for Steer-By-Wire Propulsion Designed for the latest drive-by-wire steering system, the EV-2 connects directly to Raymarine 19s SeaTalkng bus and also features a dedicated CAN Bus port for direct connection to steer-by-wire steering systems like ZF Pod Drives, Volvo IPS* and Teleflex Optimus systems. The single CAN Bus connection to the EV-2 eliminates the need for an ACU, further simplifying installation.

FCV620 Fish Finder Color LCD

FCV620 Furuno is a dual frequency (50 kHz and 200 kHz) Color LCD Sounder featuring Furuno's DSP technology. Furuno FCV620 displays underwater conditions in 8, 16 or 64 colors on a super-bright 5.6" LCD screen.

FCV620 Fishfinder with TH Transducer

Furuno FCV620 is a dual frequency (50 kHz and 200 kHz) Color LCD Sounder featuring Furuno's DSP technology. The FCV620 displays underwater conditions in 8, 16 or 64 colors on a super-bright 5.6" LCD screen. Includes 50/200 thru-hull transducer!

FCV585 Fish Finder Color LCD

Furuno FCV585 is ideal for all recreational or light commercial fishing use, FCV585 boasting a high performance, dual frequency (50/200kHz) color digital echo sounder with 600 or 1000 watts of output power.

FCV1150 LCD Echo Sounder

Furuno FCV1150 LCD Echo Sounder is a new color digital sounder designed for a variety of professional fishing operations. Furuno FCV1150 features a high-brightness, bonded 12.1" LCD display with AR-coated glass filter and anti-polarized sunglass filter, providing superior viewing even in direct sunlight. You can choose to display the echo presentation in 8, 16, or 64 colors, with color assignment dependent on the strength of the returned echo.

FCV-295 LCD Sounder Fishfinder

Furuno FCV-295 is a new color LCD digital sounder designed for a variety of professional fishing operations. Furuno FCV-295 features a bonded ‘fogging-free’ 10.4" LCD display providing superior viewing even in direct sunlight. You can display echoes in 8, 16, or 64 colors, with color assignment dependent on the strength of the returned echo.

FAX 5 Active Coupler

Furuno FAX 5 Active Coupler. Furuno FAX5 with 15 Meter Interconnect Cable. Range: 80kHz to 30mHz

FAX 30 Receiver

Furuno FAX 30 can turn any NavNet display or PC into a Weatherfax and Navtex receiver. Furuno FAX 30 is waterproof "Black Box" unit connects directly to a NavNet display or an Ethernet hub with a single Ethernet cable.

FAX408 Weather

Furuno FAX408 provides weather charts and satellite images in nine gray levels on 8" thermal paper. Electronic scanning and thermal head printing in nine shades of gray produce high quality facsimile images, while minimal mechanical components allows for an incredibly quiet operation. All known facsimile channels in the 2-25 MHz band are pre-programmed, and an additional 164 user-programmable channels are available. Fully automatic operation as available via programmable schedule timer.

FA30 AIS Receiver

Furuno FA30 Automatic Identification System (AIS) Receiver provides real-time information about AIS-equipped vessels to your NavNet vx2, AIS-ready chart plotter, navigation software or radar. The information is graphically presented allowing you to monitor and avoid AIS equipped vessels in your area.

FA50 AIS Receiver Class B

Furuno FA50 is a Class B AIS (Automatic Identification System) capable of exchanging navigation and ship data between own ship and other ships or coastal stations. It complies with IMO MSC. 140(76) Annex 3, A.694, ITU-R M.1371-2 and DSC ITU-R M.825-3 It also complies with IEC 60945 (EMC and environmental conditions).

FA150 AIS Transponder

Furuno FA150 is a shipborne Universal AIS (Automatic Identification System) Transponder capable of exchanging navigation and ship data between own ship and other ships or coastal stations.

E-Series to Devicenet Male Cable E05027

Raymarine E-Series to Devicenet Male Cable E05027.

E-Series to Devicenet Female Cable

Raymarine E-Series to Devicenet Male Cable E05026.

E-Series Video Out Cable

Raymarine E-Series Video Out Cable VGA Video Output cable for connecting E-Series to PC monitors, Plasma Television displays etc. Video cable with waterproof 15 pin VGA connectors. Select either 10M E55055 or 20M E55056 below.

E-Series Video In Cable Composite

Raymarine E-Series Video In cable composite video input cable. For attaching cameras, entertainment components, DVD players etc. to E-Series displays.

E-Series Video In Cable S-Video

Raymarine 2-Channel S-Video Input Cable for connecting cameras, entertainment components, satellite television receivers, etc. to E-Series displays.