Accessories
-
ES502 FishFinder Module
Si-Tex ES502 Fishfinder Module connects to your Si-Tex NavMate, ColorMax 6, ColorMax Wide, ColorMax 11, Explorer Plus, or Trawl Plot 12 Charting Systems to add full-featured color fishfinder capabilities.
-
Edge Bike Handlebar Mount
Garmin Edge Bike Bicycle Handlebar Mount Replacement. 1 Year Warranty
-
External Diplexer
Airmar External Diplexer, Diplex-MM and Diplex-Ray allow dual-transmission-line transducers to be converted for use with single-transmission-line sounders. For example, the DIPLEX-MM can be used to convert a dual-transmission-line transducer from BSM-2, BBFF3 or DFF3 into a singletransmission- line for use with Furuno, Garmin, Simrad, Navman, Northstar, Lowrance, Si-Tex, and other fishfinders. The DIPLEX-RAY is used for converting a dual-transmission-line transducer for use with Raymarine sounders only.
-
ETT985
- Transducer tester- Echo Sounder tester- NMEA tester- Built-in rechargeable batteryThe ETT985A simple to use, reliable and accurate tester for most Echo Sounders. Preprogrammed with factory tests for Transducers, Echo Sounders and NMEA ports.This unit can be used in a stand-alone mode, or using a connection to a PC to give accurate results and even print/save a status report, this unit eliminates uncertainty of whether a failure is in the Transducer or in the Echo Sounder. An expensive mistake if you get it wrong!Features:Tester for Transducer of frequencies from 10 kHz to 1 MHzJust the tester: 22 Impedance, resistance and phase 22 Detection of resonant point and impedance at resonance 22 Preprogrammed integrity tests for SKIPPER transducers (and others)With software AC-ETT985: 22 Graph of impedance, conductance, phase and susceptance 22 Detection of resonance, anti-resonance, bandwidth and factory limit check 22 Save to .xls format and/or print out for service reports 22 Add your own transducer checks and limits (saved in tester for later use)Simulator for SKIPPER and other continuous wave Echo SoundersJust the tester: 22 Detect and measure pulses, frequency, strength, Vpp, width and period 22 Generate return pulses with fixed or tracking format, at depth up to 999.9 m 22 Simulate fish in the water columnWith software AC-ETT985: 22 Check results against factory settings or preset default values 22 Add your own Echo Sounder values and checksNMEA testerJust the tester: 22 Monitor NMEA lines, loop back signals from devices, send standard formats for GPS, gyro, Echo Sounders, Speed Logs etc. 22 Use the unit as a NMEA to RS232 converter or to USB with included converterWith software AC-ETT985: 22 Insert your own NMEA parameters (can be saved)Test the transducer against a preset set of parameters from the manufacturer. Then test the Echo Sounder and compare to an expected screen picture. This will test programmed limitations, noise levels, cabling and Transducer operation.If the problem is NMEA connections, then simply connect the tester to the NMEA port, using the provided test clips, and monitor the traffic. Alternatively you can loop the incoming signals to the output, and see if the signals appear on the sounder unit. The unit will send standard messages for the Echo Sounder, GPS, gyro, Speed Log, and more. It will allow wiring to be diagnosed. If all else fails, or if you wish to send commands or log data, the ETT985 can be used together with a PC as a simple NMEA converter.The ETT985 is provided with test cables, power supply and a USB converter, in a soft carry bag, ready to go! The tester can be purchased alone (part number: ETT985-SA) or with activation code (part number: ETT985-SASW) for the extra test functionality within the SKIPPER service software freely downloadable from www.skipper.no.This system is ideal for anyone performing service on Echo Sounders or as a low cost analyser for anyone interested in underwater transducers.
-
External Microphone for Bluetooth
Garmin External Microphone for Bluetooth units - Use this mic anywhere in your vehicle for hands-free calling when your Garmin GPS with Bluetooth® wireless technology is paired with a compatible phone. Includes various clips and mounting options.
-
eTrex Series Holster
The Garmin Holster for e-Trex series GPS units features a hard casing covered by a durable canvas material.
-
eTrex Auto Mount
This mounting bracket for eTrex has all the qualities you're looking for: lightweight, portable, adjustable. Bracket is jointed, allowing you to position your eTrex out of the sun's glare.
-
eTrex Series Carry Case
Durable carrying case features clear vinyl lens and 'cut-away' corners for operating the side buttons AND THE "CLICK STICK" BUTTON on the front of the unit.
-
Extension Cable for JWR200
Jensen 19' extension cable for JWR200 remote control.
-
Elite-7 Flush Mount Kit
Lowrance Elite-7 flush mount kit for Elite-7 series.
-
EP-60R Fuel Flow Probe and Cable
The Lowrance EP-60R Fuel flow sensor, with 10' cable and T-connector for LMF-200 and LMF-400.
-
EP-65R Fuel Level Probe with Cable
The Lowrance EP-65R Fluid level sensor, with 10-ft cable and T-connector for LMF-200 and LMF-400.
-
EP-70R Speed Sensor Probe with Cable
Lowrance EP-70R Speed Sensor Probe Transom mount paddlewheel speed sensor, with 10-ft cable and T-connector for LMF-200 and LMF-400. 120-49
-
EP-80R Temp Sensor Probe with Cable
Lowrance EP-80R Transom mount temperature sensor, with 10-ft cable and T-connector for LMF-200 and LMF-400. 120-51
-
EP-90R Pressure Sensor
Lowrance EP-90R Pressure Sensor can provide pressure data for the following categories: Atmospheric Pressure, Engine Boost Pressure, Engine Oil Pressure, Engine Water Pressure, Fuel Pressure, Transmission Oil Pressure and Pitot Speed.
-
EP-80R Thru Hull Temperature Sensor
Lowrance EP-80R Thru-hull temperature sensor, with 10-ft cable and T-connector. 120-53
-
Evinrude Engine Interface Cable 120-62
Lowrance Evinrude engine interface cable 120-62. Interface between an Evinrude engine and NMEA network to display engine data. Comes with a T connector. For use with red NMEA network. Works with: NMEA 2000 compliant units
-
Elite-7 Sun Cover
Lowrance sun cover for Elite-7 series.
-
E-Series to Devicenet Male Cable E05027
Raymarine E-Series to Devicenet Male Cable E05027.
-
E-Series to Devicenet Female Cable
Raymarine E-Series to Devicenet Male Cable E05026.
