Products

2 ft. Power Replacment Cable (Threaded)

2 ft. Threaded Video Replacment Cable (Right Angle)

1kW Transom Mount Transducer

Si-Tex 1kW 250C/50/200ST 50/200khz Transom Mount Transducer with depth, temp and speed for the CVS-832C, CVS-833C, Genesis

1kW 200khz Bronze Thru Hull Transducer

Si-Tex 1kW 307/50/200T 50/200khz Bronze Thru Hull Transducer with depth and temp for the CVS-832, CVS-832C, CVS-833, CVS-833C, Genesis

1kW Bronze Thru Hull Transducer No Speed

Si-Tex 1kW 707/50/200T 50/200khz Bronze Thru Hull Transducer with depth and temp for the CVS-832, CVS-832C, CVS-833, CVS-833C, Genesis.

1kW Bronze Thru Hull Transducer Two 8 Pin

Si-Tex 706/50/200T 1KW 50/200khz Bronze Thru Hull Transducer with depth and temp for the CVS-841, CVS-208, CVS-209, CVS-210, CVS-211. Two 8-Pin Plugs

2.25" x 0.87" Motorcycle Case w/1" Ball

RAM 2.25" x 0.87" Motorcycle Base with 11mm Hole and 1" Ball, see RAM Mount features below.

2 ft. Audio/Video Replacement Cable (Threaded)

2" Nylon Thru-Hull Transducer

1kW, stainless steel, thru-hull w/ fairing, Depth & Temp, SS270W (6-pin)

1KW Bronze Transducer

20 Ft Extension Cable for MRD70/RD44

2' (0.60 M) VHF Marine Band 3dB Antenna

2.1L Pump Kit for GHP 10

2.4 GHz Wifi Marine Antennas

Getting and staying connected on the water has never been easier. Digital Antenna's 2.4GHz premium quality 10dB gain omni-directional antennas achieve optimal signal range on 802.11 b/g wireless LANs, Bluetooth and multipoint radio equipment where high gain and wide coverage is desired. Designed to match other antennas on your boat, our WiFi antennas are available in lengths of 30 1D, 4' and 8'.Available in 800 series only (not available in 500 series). PowerMax!22 low loss antenna cables or DA440 bulk cable must be used to minimize signal loss.All of our antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability.All 2.4 GHz WiFi Antennas Feature: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 10dB gain800 Series: 825-WLW | 825-WLB - Length: 30" 814-WLW | 814-WLB - Length: 4' 848-WLW | 848-WLB - Length: 8' Mount: Standard 1 1D 1314 threaded base Connector: Highest quality female N type Cable: Not included 13 use our PowerMax!22 low loss antenna cables

1kW Transducer Mix and Match Cable

Airmar 1kW Transducer Mix and Match cables although all Mix and Match transducers are sold with the appropriate cable needed for installation, replacements are available separately to allow transducer conversions or for replacing lost or damaged cables.

2.2kw 18 Inch Radome RSB0094-075

Furuno 2RB0094-075 is a sleek 18" Radome Antenna with a 2.2kW TR. The RSB0094-075 has a 5.2 horizontal beam width, a range of 24 nautical miles. Replacement for 1823c 1824c

2.1-Liter High Performance Pump Kit GHP 10

Garmin 2.1-Liter High Performance Pump Kit for GHP 10 Corepack is for use with larger boat steering systems that include ram sizes between 10 cubic inches and 24 cubic inches and outboard applications of 2 or more motors with combined total horse power greater than 400hp. This includes both Verado and non-Verado applications.

19x HVS GPS Antenna NMEA 0183

Garmin 19x HVS GPS Antenna NMEA 0183 highly accurate GPS 19x HVS position receiver/antenna provides up to 10 Hz update rates for position, velocity and time data. It offers high-sensitivity reception and enhanced position acquisition to the Garmin family of marine instruments, autopilots and multifunction displays.

19x GPS Antenna NMEA 2000

Garmin GPS 19x Antenna NMEA 2000 highly accurate GPS 19x NMEA 2000 position receiver/antenna provides 10 Hz update rates for position, velocity and time data. It offers high-sensitivity reception and enhanced position acquisition to the Garmin family of marine multifunctional displays (MFD), instrument display and autopilots.