Products

AC12 Autopilot Computer

Simrad AC12 Autopilot computer the brains in almost all Simrad autopilot systems for vessels less than 35'.

AC42 Autopilot Computer

Simrad AC42 Autopilot computer: The autopilot computer is the main unit in the Simrad AP24 and Simrad AP28 autopilot systems. Simrad AC42 contains the steering computer and electronics for the drive unit motor and clutch and provides interface to other system components.

ACM100 Alternating Current Monitor

AC to DC Cigarette Lighter Adapter

AC adapter, VHF155/255

AC42 Autopilot Computer w/15mtr Simnet Cable

AC12 Autopiolot Computer w/15mtr Simnet Cable

AC Digital Voltmeter - 80 to 270V AC

Displays voltage from 80 to 270 Volts3 levels of display brightnessSplashproof frontManual sleep mode blanks display for power conservation

AC Digital Ammeter - 0 to 150A

Displays amperage from 0 to 150 Amps3 levels of display brightnessSplashproof frontIncludes current transformerManual sleep mode blanks display for power conservation

AC Digital Frequency Meter - 40 to 90 Hertz

Displays frequency from 40 to 90 Hertz3 levels of display brightnessSplashproof frontManual sleep mode blanks display for power conservation

AC Digital Multi-Function Meter with Alarm

Displays amperage from 0 to 150 AmpsDisplays voltage from 80 to 270 VoltsDisplays power from 0 to 35 KilowattsDisplays frequency from 40 to 90 HertzHigh and low voltage and high amperage alarms, both audio and visual3 levels of display brightnessProgrammable sleep mode blanks display for power conservationSplashproof frontIncludes current transformer

AC Current Single Function Transducer 13 TAC-321DG

The current transducer types TAC-311DG or TAC-321DG are transducers for measurement of a sinusoidal AC current converted into a DC current signal proportional to the measured value on a single-phase network.PLCs, PCs, microprocessor control, indicators, alarm units etc. can be operated by the output signal.Features:Wide range of standard measuring/output rangesCompact design, 55 x 75 mmEasily accessible terminalsEasy identification of unit/functionAccuracy class 0.535 mm DIN rail or base mounting

AC Voltage Single Function Transducer 13 TAV-311DG

The voltage transducers type TAV-311DG or TAV-321DG are transducers for measurement of a sinusoidal AC voltage converted into a DC current or DC voltage signal proportional to the measured value on a single-phase or 3-phase network. PLCs, PCs, microprocessor control, indicators, alarm units etc. can be operated by the output signal.Features:Wide range of standard measuring/output rangesCompact design, 55 x 75 mmEasily accessible terminalsEasy identification of unit/functionAccuracy class 0.535 mm DIN rail or base mounting

AC Voltage Single Function Transducer, TAV-321DG

The voltage transducers type TAV-311DG or TAV-321DG are transducers for measurement of a sinusoidal AC voltage converted into a DC current or DC voltage signal proportional to the measured value on a single-phase or 3-phase network. PLCs, PCs, microprocessor control, indicators, alarm units etc. can be operated by the output signal.Features: Wide range of standard measuring/output rangesCompact design, 55 x 75 mmEasily accessible terminalsEasy identification of unit/functionAccuracy class 0.535 mm DIN rail or base mounting

ACP 1 Pilot Computer

B&G ACP 1 Pilot Computer processor for H2/H3 enhanced has been proven in the world's most testing environments - ACP1 used by bluewater cruisers, single-handed racers and record breakers.

AC PC Adapter 4 Pin

This adapter allows you to connect your GPS unit to AC power (U.S., 110-volt) and to your PC. Features standard 9-pin D connector.

AC PC Adapter 18pin (US)

This adapter allows you to connect your GPS unit to AC power (U.S. 110-volt) and to your PC. Features standard 9-pin D connector.

AC Travel Charger

Garmin AC Travel Charger for iQue m3 and m5

ACM100 Alternating Current Monitor

Maretron ACM100 Alternating Current Monitor is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA 2000 marine data network.

AC70 Autopilot Computer

Simrad AC70 Autopilot Drive computer for rudder using reversible motor or non-isolated solenoids and frequency rudder angle feedback. Connection for NFU remote control and one-channel IEC 61162-1 (NMEA 0183) RX/TX or IEC 61162-1,2 and 3 compatible.